NF C91-004-1-2001 电磁兼容性.第4-1部分:试验和测量技术.IEC61000-4系列综述

上一篇: NF C91-003-3/A1-2001 电磁兼容性.第3-3部分:限值.额定电流小于或等于16A/相并且在无条件连接情况下的设备用公共低压供电系统的电压变化、电压波动和电压闪动的限值
下一篇: NF C91-004-5/A1-2001 电磁兼容性.第4-5部分:试验和测量技术.电涌抗扰试验

【英文标准名称】:Ships'external-boundblocks
【原文标准名称】:船用钢索木滑车
【标准号】:JISF3423-1976
【标准状态】:作废
【国别】:日本
【发布日期】:
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JISC)
【起草单位】:Shipbuilding
【标准类型】:()
【标准水平】:()
【中文主题词】:钢索滑轮组;钢丝绳;海船;木材
【英文主题词】:ropepulleyblocks;wood;steel-wireropes
【摘要】:
【中国标准分类号】:U24
【国际标准分类号】:
【页数】:5P;A4
【正文语种】:日语


Product Code:SAE J518
Title:Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Bolt Split Flange Type
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope: This SAE standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to 4-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. (See Figures 1 and 2.) Also included are recommended port dimensions and port design considerations.The flanged heads specified are incorporated into fittings having suitable means for attachment to tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections.THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J518 HOSE CONNECTIONS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.Flanged heads shall be as specified in Figure 3 and Table 1. Split flange clamp halves shall be as specified in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table 2.O-ring seals, having nominal dimensions as indicated in Table 1, are used in conjunction with these connections. They shall conform to the seals specified in SAE j120, Table on Dimensions and Tolerances.bolts for use with these connections shall be of the sizes and lengths indicated in Table 1. They shall be of SAE Grade 5 material or better as specified in SAE j429. Socket head cafied in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table 2.O-ring seals, having nominal dimensions as indicated in Table 1, are used in conjunction with these connections. They shall conform to the seals specified in SAE j120, Table on Dimensions and Tolerances.bolts for use with these connections shall be of the sizes and lengths indicated in Table 1. They shall be of SAE Grade 5 material or better as specified in SAE j429. Socket head cap screws of SAE Grade 5 material or better are acceptable.Lock washers, if used, shall be in accordance with the light spring lock washers specified in SAE J489. Dimensions of Light, medium, Heavy, Extra Heavy, and Hi collar spring Lock Washers, and or sizes applicable to the corresponding bolts.the following general specifications supplement the dimensional data contained in Table 1 with respect to all unspecified detail.p screws of SAE Grade 5 material or better are acceptable.Lock washers, if used, shall be in accordance with the light spring lock washers specified in SAE J489. Dimensions of Light, medium, Heavy, Extra Heavy, and Hi collar spring Lock Washers, and or sizes applicable to the corresponding bolts.the following general specifications supplement the dimensional data contained in Table 1 with respect to all unspecified detail.
Rationale: This SAE standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to 4-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. (See Figures 1 and 2.) Also included are recommended port dimensions and port design considerations.The flanged heads specified are incorporated into fittings having suitable means for attachment to tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections.THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J518 HOSE CONNECTIONS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.Flanged heads shall be as specified in Figure 3 and Table 1. Split flange clamp halves shall be as specified in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table 2.O-ring seals, having nominal dimensions as indicated in Table 1, are used in conjunction with these connections. They shall conform to the seals specified in SAE j120, Table on Dimensions and Tolerances.bolts for use with these connections shall be of the sizes and lengths indicated in Table 1. They shall be of SAE Grade 5 material or better as specified in SAE j429. Socket head cafied in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table 2.O-ring seals, having nominal dimensions as indicated in Table 1, are used in conjunction with these connections. They shall conform to the seals specified in SAE j120, Table on Dimensions and Tolerances.bolts for use with these connections shall be of the sizes and lengths indicated in Table 1. They shall be of SAE Grade 5 material or better as specified in SAE j429. Socket head cap screws of SAE Grade 5 material or better are acceptable.Lock washers, if used, shall be in accordance with the light spring lock washers specified in SAE J489. Dimensions of Light, medium, Heavy, Extra Heavy, and Hi collar spring Lock Washers, and or sizes applicable to the corresponding bolts.the following general specifications supplement the dimensional data contained in Table 1 with respect to all unspecified detail.p screws of SAE Grade 5 material or better are acceptable.Lock washers, if used, shall be in accordance with the light spring lock washers specified in SAE J489. Dimensions of Light, medium, Heavy, Extra Heavy, and Hi collar spring Lock Washers, and or sizes applicable to the corresponding bolts.the following general specifications supplement the dimensional data contained in Table 1 with respect to all unspecified detail.